Producto: Filtro frío Punto de obstrucción Filtro

Productos

Información de contacto

Reservar cita

Ansenta desea establecer una cooperación comercial beneficiosa para ambas partes con distribuidores de todo el mundo.

Filtro frío Punto de obstrucción Filtro

Marca:ANSENTA
Origen del producto:CHINA
Plazo de entrega:En 7 días
Capacidad de suministro:Suministro directo de fábrica
Modelo:AST-CFPP2
Introducción:
The Cold Filter Plugging Point Filter is a laboratory instrument designed to measure the ability of petroleum products to pass through a filter at low temperatures, thereby assessing their flow characteristics in cold environments. Being equipped with refrigeration bath and other accessories, it can be used to determine cold filter plugging point of distillate fuels.This test is crucial for ensuring the proper function of heating oils, diesel fuels, and other petroleum products during winter or in low-temperature regions.The instrument is designed and made as per the Industry Standard of People’s Republic of China SH/T 0248-2006 Standard Diesel and Domestic Heating Fuels – Determination of Cold Filter Plugging Point.
Descargar:
Filtro frío Punto de obstrucción Filtro

Póngase en contacto con Correo electrónico

Productos

Standard Compliance: SH/T 0248

Technical Features
The cooling bath is dual- hole, allowing two samples to be tested simultaneously. The refrigeration temperature is intelligently controlled with high precision.
Adopts intelligent timing technology for easy parameter setting, with clear timing display and automatic stop when the set time is reached.
Equipped with an aspiration pump to effectively control the suction flow rate.
Complete accessories, including two negative pressure bottles for suction pressure control, fully meeting the requirements of SH/T 0248-2006.

Especificaciones técnicas
Power supply: 220V 50Hz
Temperature range: 60℃ ~ -50℃
Accuracy: ±0.1℃
Cooling method: Compressor refrigeration
Working bath: 1 bath with 2 holes
Total power consumption: ≤1200W
Ambient temperature: 5~35℃
Relative humidity: ≤85%
Dimensions: 550450420 mm
Weight: 30 kg
Cold Filter Plugging Point Suction Filtration Unit
Power supply: 220V 50Hz
Intelligent timer: Timing range 1 second ~ 99 hours, factory setting: 60 seconds 3
. U-tube differential pressure gauge: 0~300 mm
. Aspiration pump: Ultra-quiet, in compliance with SH/T 0248 5. Ambient temperature: 5~35℃
Relative humidity: ≤85%
Total power consumption: ≤100W
Dimensions: 200×450×400 mm
. Weight: 3 kg
Application: Can be used independently. When equipped with a suitable cooling bath and other required conditions, it
can perform cold filter plugging point tests.

Descargar:
Filtro frío Punto de obstrucción Filtro